One of the problems that occurs when connecting the digital console to the TV is the absence of color, that is, the image is, but black and white. The problem may occur both when the receiver DVB-T2 is connected and the satellite / cable receiver. As a rule, it happens when the receiver is connected using the RCA cable, which is usually called "tulips". The main reasons for the absence of color: Incorrect connection or wrong color mode in the TV settings.

Incorrect connection

A number of TVs, especially some Samsung and Philips models do not allow you to directly connect T2 tuner to the TV "Tulips", how much there is simply no composite connector RCA. At the same time, a rarely used component time is most often present. In the video transmission composite, only one wire is used and it has a standard yellow color. In the component version for the video signal, three cables are used: red, blue and green. In modern TVs, this entrance is often made universal, in such cases the green component connector is circled with a circle of yellow. The picture shows the option of the proper connection of the cable RCA in this case.

But the image of a purely component entrance, where the jet connectors are generally absent. If you connect a yellow tulip in the green input according to the same scheme as on the previous picture, then you will get a black and white image. The exit is there only one: either search on TV. An ordinary composite input can be located on the side or on the front panel of the TV, or use the SCART or HDMI connectors and the corresponding cable. There is also a series of samsung TVs, where the RCA analog inputs and SCART are implemented through special adapters that are included with the TV. But it happens that adapters are not initially used and over time they are simply lost. Then you can connect the console only through the HDMI entrance, which is implemented without any "cunning" adapters.

PAL / SECAM CHANGE SYSTEM

The reason for the black and white image can be installed in the TV settings manually the chroma system other than PAL. In this case, you need to find in the TV menu of control of the chroma system and set the autorem or PAL mode. It is in this mode that digital consoles are broadcast by default.

When the new TV shows black and white, first of all, it is recommended to contact the warranty service center (if the device is purchased from official distributors). In accordance with the contract of sale, they are obliged to solve the problem, replace broken on the original spare parts taken from their own warehouse, or to completely change the technique.

The new TV screen shows incorrect if it is incorrect to connect. The colors of the plugs correspond to their intended:

1. Red, White - Mono and stereo audio (All sound tracks).
2. Yellow - Composite Analog Video Signal (Feedless Picture No Sound). In standard mode, accepts and transmits the video signals of PAL, SECAM and NTSC standards. Colors are transmitted together, the delay of the plug completely removes the chromaticity.
3. Green, blue - component video signals. Transmitted without sound (connected separately), and is supplied separately (in contrast to the previous version). The exhaustion of the plug of the socket is characterized by partial and single loss.

The factory marriage also becomes the reason for the appearance of black and white frames.

The appearance of some black and white channels in the TV indicates outdated software. The human factor here actually does not play any role, except that you can forget about firmware updating. Modern equipment itself finds the source of the problem and offers the user to upgrade. You only need to click "OK" and wait some time.

More outdated equipment is not independently updated. It will be necessary to search for the necessary software on the Internet, upload it to a flash drive and update manually.

Independent diagnosis and repair

If the TV has become black and white, it is necessary check the color reproduction in the menu using PU. This approach is logical if all channels show the same. When only one of them is deprived of chroma, then it's not about your technique. It is necessary to call the operator of the company providing television so that they launched the normal transmission operation.

You should also check the antenna. Its signal is damaged in many cases:

• porn or partially bare cable;
• plug deployed;
• outdoor antenna broke.

When settings are knocked up regularly, a qualified intervention will be required. Alone to eliminate malfunctions in your Sony or Philips will not be able to do without appropriate skills. Also, the repair of the TV with their own hands is dangerous for health, as some nodes accumulate charge and give it when touched.

Advantages of contacting TV-Fix service center

Our service center "TVF" is open daily from 8 am to 10 pm without days off and holidays. The masters provide professional services, they are dealt with both the software of modern equipment and its technical component. Available application for departure of a qualified specialist via the Internet. Diagnostic procedures are held at home, then a professional starts to work on the repair, update of software, flashing the instrument. Most importantly, we provide a guarantee because we are confident in the qualifications of workers, the quality of the details and the work of the tools used.

I think I'm stupid. I do not understand how to connect the DVD to the TV. TV - Philips 5 generation, such as this - http://holodilnik.ru/audio_video/lcd_tv/philips/32pfl5404/down_payment/
DVD - Sony, no player, but recording, that is, with a complete set of all kinds of functions. To another TV was connected without problems, you need to connect to this now, and I do not understand how. The tulip cord (it seems so called), on the TV - 4 outputs, on the cord - 3 multicolored pieces. Maybe another cable is needed to connect?
The ambush is that I can not check, I connected or not. On the remote, there is no identification button to switch to video mode.
Already gathered in the store with this remote control, but may not disagree?

Usually yellow - video, white and red - audio.
On the TV there should be a source type button (Source), pressing the active input channels (TV - antenna, external, HDMI, USB, etc.) when pressing shows more brighter colors. Play, you will not break, everything should work.

PS: when selecting a DVD signal must be included in the network.

Quote:

On the TV panel there is a Source button, I wrote about it. Read carefully what I wrote earlier. In addition, in the TV manual, if he is not on the pee, it is expected to be written (and even drawn), how to connect DVD, etc. Devises.

Hello. I can connect the DVD to the TV. Says there is no video signal. TV Philips-37PFL5405H60. I tried to connect as an ordinary TV, through tulips, but there is no connector on the video. I tried to connect a laptop to the same TV via VGA and 2RCA (they needed such), there is also no video signal. How to connect to him at least something to watch discs?

the same problem! We connect to the DVD TV, the sound is normal and the color is not completely, shows black and white connect via coaxial (three connector). On the DVD player panel: yellow in torth, red and white, respectively, in audio. On the TV panel: Yellow in Y, red and white, respectively, in the audio L / R ... Skart connector on DVD is not provided ... And in the instructions for TV, only the connection through Skart is described ...

Quote: Well, what do you suffer? Buy a cable "Skart Tulips" or a tulip adapter on SBANT.

Quote:

(Some strange connection. In addition to y, there should be more on the TV yet b "and r"; but if there are no similar outputs, then there are no options without scarning).

This, if I understood correctly, the video signal is filed on the Y-channel of the brightness, in this case the colors will not.

P.S. If you are confident in the correct connection, then you need to go to the TV setup. Look, what chroma system is selected. It is necessary to set "Auto" or "Pal".

Oh, tell me, please stupid :) I connected your home. The tutor is connected to the TV. Toshiba, House.kin.Coni, the flash drive reads normally, sound 5.1. All is cool, but the sound from TV does not do, or only through the speakers of the telek. I would like to hear the sound through the speakers at least 2.0, but it is through the battle. Connected optical wire and nothing, how to be? Already tormented :(

Quote:

I understand that to TV "Toshiba" connect both a flash drive and antennaand the sound on the "receiver + speakers" is only with flash drive?
Maybe in the TV menu you need to choose acc. Sound exit for this?
If there are tulips \\ sk cart on TV and on the receiver, try through them.

Please tell me. I can not figure out the connection of the DVD player (BBK) to the SMSung LED TV, the fact is that there are no tulips on the telly. I bought a Tulip-Skart adapter, a telly sees some connection (in the field the field is active), but when you select it writes that there is no signal. I do not know what trouble is. Can anyone come across, tell me.